Question 1

Does the Dropson filter bottle require installation or replacement cartridges?

Accepted Answer

The Dropson filter bottle doesn’t require installation or replacement cartridges. Simply remove the protective caps, discard the safety ring, and insert the bottle into the tap. Before using the bottle for the first time, let 2 liters of water run through without consuming it to prepare the filter. This will ensure the system’s optimal filtration capacity.

Question 2

What faucets is the Dropson filter bottle compatible with?

Accepted Answer

The Dropson filter bottle easily fits most standard faucets (with round spouts) thanks to its flexible diaphragm. It also includes an adapter for faucets with short standard spouts.

Question 3

Can I use my Dropson filter bottle with liquids other than tap water?

Accepted Answer

No. The Dropson portable water filter is designed to filter tap water only, in accordance with WHO guidelines. It must not be used with microbiologically contaminated water or water from unknown sources.

Question 4

Can I use the Dropson filter bottle with hot water?

Accepted Answer

No. The Dropson filter bottle is not designed for use with hot water, as the materials could deteriorate.

Question 5

What is the ideal water flow rate to achieve maximum quality and how do I measure it?

Accepted Answer

The Dropson filter bottle filters up to 1 liter of water per minute with excellent quality. It is recommended not to exceed 1.5 liters per minute to avoid reducing the system’s performance. The flow rate has a direct impact on water quality:
1 liter/minute: excellent quality;
2 liters/minute: good quality;
3 liters/minute: acceptable quality.
To calculate a flow rate of 1 liter per minute, simply fill a 0.2-liter glass five times in one minute. Alternatively, adjust the tap to fill a glass in approximately 12 seconds.

Question 6

What should I do if I can’t accurately measure a flow rate of 1 liter per minute?

Accepted Answer

Simply open the tap and adjust it until you get a steady, clear flow of water without splashing.

Question 7

Is it recommended to hold the Dropson filter bottle while in use?

Accepted Answer

Yes, it is recommended to hold the Dropson filter bottle with one hand while in use. This is especially important, as exceeding the optimal flow rate could cause it to fall onto fragile containers.

Question 8

How should I remove the Dropson filter bottle from the tap and what precautions should I take after each use?

Accepted Answer

After each use, remove the filter bottle from the tap by tilting it slightly to avoid stressing the silicone seal. Do not shake the bottle to remove excess water, as the internal membrane could tear. Small black microparticles may also come out through the inlet and outlet holes.

Question 9

Why is it better to put the protective caps on with some water inside rather than shaking the bottle?

Accepted Answer

Because if air enters the bottle, the next time it’s used, the water pressure could cause it to come off the tap. Additionally, air is more likely to contain bacteria, while unfiltered water contains chlorine that prevents bacterial growth.

Question 10

How can I properly remove the bottom cap of the bottle?

Accepted Answer

Place your fingers in the center of the cap and gently twist while pulling outward. Do not try to remove it by pulling on the sides or using tools to pry it open.

Question 11

Where should I store the Dropson filter bottle after each use?

Accepted Answer

The Dropson filter bottle should be stored in the refrigerator to ensure optimal conditions and prolong the filter’s bacteriostatic effect. It should never be stored in the freezer or under direct sunlight.

Question 12

What is the capacity and lifespan of the Dropson filter bottle?

Accepted Answer

Its capacity is approximately 300 liters. It should also be replaced 3 months after the first time water passes through the filter. Finally, if you notice a change in the taste of the water, it should be replaced.

Question 13

How can I monitor the usage time of my Dropson filter bottle?

Accepted Answer

By downloading the free Dropson Control app for iPhone and Android. It monitors the filter’s status and sends an alert when it needs to be replaced.

Question 14

How long can a Dropson filter bottle last unopened and under what storage conditions?

Accepted Answer

If properly stored, it can last up to 2 years unopened. Proper storage requires a temperature between 1°C and 40°C. It’s also important to avoid direct exposure to light or heat sources and to keep the caps closed with the safety ring intact.

Question 15

What materials is the Dropson filter bottle made of and what does it remove from the water?

Accepted Answer

It is made only of biomaterials and recyclable, food-grade plastics. Its proprietary micrometric filter media is composed of plant-based microfibers. It also includes activated carbon powder and natural bacteriostatic elements without chemicals. Additionally, it preserves natural minerals while removing contaminants such as chemicals, heavy metals, and pesticides.

Question 16

Why is the Dropson filter bottle a sustainable alternative and how much can you save?

Accepted Answer

Because it helps reduce plastic bottle consumption. The bottle contains very little plastic, only the equivalent of three bottles. In addition, a single filter bottle can purify up to 300 liters of water and save up to 240 euros per year on bottled water. This is based on an average family consumption of 1,200 liters per year and a cost of €0.25 per liter.

Какво казват нашите клиенти в Google

Кликнете тук, за да видите всички

Филтърна бутилка Dropson - често задавани въпроси